Showing 1–12 of 21 results

CoralVue HYDROS System Command Bus Cable (Data + Power) 1 Foot

8$
This HYDROS System Command Bus Cable allows HYDROS devices to power and communicates with other HYDROS devices.  This is a DATA &  POWER cable that CAN supply power from unit to unit.
Add to cart

CoralVue HYDROS System Command Bus Cable (Data + Power) 3 Foot

10$
This HYDROS System Command Bus Cable allows HYDROS devices to power and communicates with other HYDROS devices.  This is a DATA &  POWER cable that CAN supply power from unit to unit.
Add to cart

CoralVue HYDROS System Command Bus Cable (Data + Power) 6 Foot

11$

HYDROS 5 PIN System Command Bus Cable

This HYDROS System Command Bus Cable allows HYDROS devices to power and communicates with other HYDROS devices.  This is a DATA &  POWER cable that CAN supply power from unit to unit.
Add to cart

Hydros 1 Inch Flow Sensor

74$

The HYDROS Flow Sensors are easy-to-install flow meters that communicate to the HYDROS app the flow rate of water passing through it. It is safe for use in freshwater and saltwater aquarium systems.

The HYDROS Flow Sensors can be used for reactor feed lines and return pumps. Using the HYDROS Flow Sensors can give you peace of mind that your vital aquarium equipment is operating correctly. You can also use the data it collects in the HYDROS app to create rules. For example, if the flow rate were above or below a certain threshold, you can have HYDROS turn off a piece of equipment that is plugged into a Control XP8, Power 4 WiFi power strip, or Smart Plug outlet.

Add to cart

Hydros 9ft Drive Accessory Extension Cable

11$

HYDROS Drive Port Extension Cable

The HYDROS Drive Port Extension Cable is 9 feet long and is compatible with all HYDROS Drive Port Accessories.

Add to cart

Hydros 9ft Sense Accessory Extension Cable

11$

HYDROS Sense Port Extension Cable

The HYDROS Sense Port Extension Cable is 9 feet long and is compatible with all HYDROS Sense Port Accessories.

Add to cart

HYDROS Command Bus Terminator

5$
HYDROS Command Bus Terminator
Add to cart

HYDROS Control Power Supply

24$

HYDROS Control Power Supply

Allows you to power the HYDROS Control. This power adapter is NOT compatible with the HYDROS WaveEngine or the IceCap Dual Pump Controller. This version comes with a HYDROS Terminator already installed.  This is recommended for HYDROS Collectives, where there is no available command bus port to establish a regular Terminator. (i.e., Collectives with Data-Only cables).
 

WARRANTY

Add to cart

Hydros Control X10

915$

A Whole New Level of Aquarium Monitoring and Control

About HYDROS Control X10

The Control X10 offers a range of new advanced features, including multi-dosing heads and a salinity probe port (salinity probe sold separately), taking aquarium control to a whole new level. This highly versatile controller can effortlessly handle essential functions for maintaining a healthy aquarium. With just one Control X10, you can dose liquids, monitor temperature, and track pH or ORP levels. Additionally, you can expand its functionalities by using additional accessories to test salinity and alkalinity, monitor water levels, detect leaks, and power other Control devices.

Whether you have a saltwater aquarium, freshwater tank, or pond, the Control X10 can be a standalone controller or seamlessly integrated into other HYDROS Controls to create a more comprehensive system. Operating on a HYDROS Safety Net and boasting an IP65 rating, this controller ensures that your equipment and aquatic life thrive in a safe and secure environment. Moreover, all HYDROS products are meticulously engineered, assembled, and supported in the USA.

HYDROS_X10_includes

Control X10 Includes:

  • X10 Controller
  • Power Supply
  • pH Probe with Calibration Solutions
  • Temperature Sensor
  • Four (4) 10ft Dosing Tubing
  • Calibration Beaker

X10 Specifics

Dimensions (LxWxH): 7 3/4 x 6 3/4 x 4 1/4in

What you can expect from your HYDROS Smart Device

*HYDROS WiFi Power Strip, Control XP8, or Smart Plug required, but not included with Control X10  
  • Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app
  • Ability to monitor and control your HYDROS device(s) locally through WiFi
  • A fast dual-core 32-bit processor that allows control decisions to be made within each device
  • User sets the alerts and notifications
  • Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device
  • HYDROS Command Bus connections to transfer data and power to devices
AppNoCoding_1

Quick & Easy Setup

There is no complicated programming language to learn. If you can operate a smartphone, you can be the operator of a smart aquarium—tap, drag, press, or flick to adjust settings using intuitive icons and simple menus. Schedule each component in your aquarium life support system to run at a specific time, frequency, or intensity.  You can also use real-time data and easily configure more complex actions.

IP65 Rated – Splash Proof, Dust Proof, and Secure Connection

HYDROS devices look like industrial controllers because they are built to function in the harsh environment of a marine aquarium. The IP65-rated HYDROS enclosure and aircraft-style connectors ensure long-term reliability in the face of splashes and corrosive salt spray.
ControlIP65Rated
HYDROS_X10CommandBus

Command Bus - 2 Available

The Command bus communicates with other HYDROS devices for the ultimate failsafe and can also power other Control devices.

Drive Port - 2 Available

The Drive Ports provide switched 12V DC power for running small HYDROS aquarium devices. The Control continuously monitors the exact current supplied by each port, so you will be immediately notified if a motor or pump quits drawing current or draws too much. Each drive port can handle up to 1.5A, and the entire device can handle up to 3A in total. Drive Ports Currently Support:
  • Auto Top-Off (ATO) pumps
  • Dosing pumps
  • Cooling fans
  • Cabinet LED lights
  • Solenoids - 1/4in water and CO2 control
  • Steering valves and relays Stirrers
  • HYDROS IV
DrivePortAccessories
HYDROS_X10_SensePorts

Sense Port - 4 Available

The Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. Sense Ports Currently Support:
  • Temperature sensor - Either air or water
  • Fluid level - Optical sensors to measure liquid levels
  • Leak detection - Monitoring for both point and wide area leak detection
  • Flow rate - Measures the amount of fluid flowing through a pipe
  • Total dissolved solids - Dual measurement of the TDS levels from your RODI system

Salinity Probe Port - 1 Available

The Salinity Probe is a special probe port for use with conductivity probes to monitor the salinity of your aquarium's water. Salinity Probe Kit is not included but is required to monitor Salinity.

Isolated Testing Vessel

This add-on ensures that the test sample is physically separated, preventing any electric interference from other equipment in the aquarium system.  HYDROS iV is not included but recommended.
HYDROS iV
pHORP_probes

pH/ORP Probe Port - 1 Available

One of the most remarkable ports on the HYDROS Control X10 is the Probe Port. You can connect an ORP or a pH probe to the Probe Port but, this is no ordinary pH input! The circuitry is based on an ultra-high-quality input chip specifically designed for these types of probes. Each pH input provides digital galvanic isolation from the rest of the system. Galvanic isolation prevents interference with other accessories connected to the system like motors and pumps. Digital Galvanic isolation preserves the accuracy of the measurement by converting the signal to a digital domain before crossing the isolation threshold. pH/ORP Probe Ports Currently Support:
  • pH Measurement
  • ORP Measurement
  • Alkalinity input from an external measurement system

High Precision Stepper Dosers - 4 Available

4 independent fluid metering stepper pumps provide remarkable precision dosing your favorite two part, trace elements, water changes, liquid food additives, and alkalinity testing to name a few common uses. Rated pump speed: -100mL/min to 100mL/min Minimum per single dose: .1mL Stepper Motor Features:
  • Quiet Operation
  • It can run in forward and reverse
  • Exact Metering of Liquids
  • Color-Coded Dosing Heads and Tubing
  • Easy to Service
4StepperMotors
WiFiOutlets

Control up to 8 WiFi Devices

The HYDROS App allows you to create rules and set schedules to control our 4-Outlet WiFi AC Power Strips and Smart Outlets. Quickly turn on or off different pieces of aquarium equipment like pumps, powerheads, lights, heaters, algae scrubbers, UV sterilizers, protein skimmers, and more.

Example Setup A: Alkalinity and Salinity Monitoring

ExampleSetupOne

Example Setup B: Balling Method Dosing with Salinity Measurement

ExampleSetupTwo
 

WARRANTY

Add to cart

Hydros Control X3 (Controller Only)

216$
HYDROS Control X3 can connect to two sensor devices, including temperature sensors, water level sensors, and leak detectors. The device also includes a Probe Port for monitoring pH and ORP levels. This compact controller is ideal for both saltwater and freshwater aquariums and can be used on its own or with other HYDROS Control devices. Control X3 can send alerts and notifications and control outlets for lights, pumps, feeders, and more.
Add to cart

HYDROS Control X4 / XP8 PRO Pack

817$

The Ultimate Aquarium Monitoring and Control System

The HYDROS Control X4 PRO Pack includes two Control devices, the Control XP8 and Control X4. Combine these Controls to create a secure and impressive set-up for both saltwater and freshwater aquariums. Connect up to four sensor devices, including temperature sensors, water level sensors, and leak detectors. The device also includes two Drive Ports for powering pumps and solenoids and two Probe Ports for monitoring pH and ORP levels. Connect up to eight pieces of aquarium equipment, including heaters, lights, pumps, skimmers, and more, to the 120V AC outlets on the Control XP8. Both devices can send alerts and notifications and connect up to 8 WiFi devices for added control on additional equipment. Both devices can send alerts and notifications and connect up to 8 WiFi devices for added modular control on additional equipment like lights, pumps, feeders, and more by simply adding a HYDROS WiFi Power Strip or HYDROS Smart Plug (both sold separately). All HYDROS products are engineered, assembled, and supported in the USA. What’s Included in the X4 PRO Pack:
  • 1x Control X4 Unit
  • 1x Control XP8 Unit
  • 1x Temperature Sensor
  • 1x pH Probe & Calibration Solutions
  • 1x 6ft Command Bus Cable with two Terminators
  • HYDROS App

About Control X4

HYDROS Control X4 is a powerful and robust aquarium controller capable of performing all essential functions needed to maintain a healthy aquarium without the need for extra expensive modules. Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Just one Control X4 can monitor temperature, pH, ORP, and water level, to name a few, and control pumps, timers, level sensors, and much more thanks to its technologically advanced design. It can be used as a standalone controller for saltwater aquariums, freshwater tanks, pond applications, or it can be added to other HYDROS Controls to build a more extensive system. The Control X4 operates on a HYDROS Safety Net and is rated IP65 to keep your equipment and aquatic life alive and thriving. All HYDROS products are engineered, assembled, and supported in the USA.

4 - Sense Port

The Sense Port is a new concept in aquarium parameter measurement. HYDROS devices include several Sense Ports. A Sense Port is a generic input port that can accept data from numerous different types of sensors. Sense Ports currently support:
  • Temperature probes
  • Optical level sensors (single and dual)
  • Capacitive non-contact liquid level sensors
  • Rope leak detectors
  • Point leak detectors
  • Flow rate sensors
  • Magnetic switches
  • Push-button switches

2 - Drive Port

The Drive Ports provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control, so if a motor or pump quits drawing current or draws too much, you will be immediately notified. Accessories currently supported include:
  • Auto Top-Off (ATO) pumps
  • Cooling fans
  • Cabinet LED lights
  • Solenoids to control reverse osmosis systems

2 - Probe Port

One of the most remarkable ports on the HYDROS Control X4 is the Probe Port. You can connect an ORP or a pH probe to the Probe Port but, this is no ordinary pH input! The circuitry is based on an ultra-high-quality input chip specifically designed for these types of probes. Each pH input provides digital galvanic isolation from the rest of the system. Galvanic isolation prevents interference with other accessories connected to the system like motors and pumps. Digital Galvanic isolation preserves the accuracy of the measurement by converting the signal to a digital domain before crossing the isolation threshold.

0-10V Port

The HYDROS Control X4 has 0-10V I/O (input and output) ports that allow it to control and receive commands from other HYDROS devices and accessories from other brands. A legacy automation system can provide input via the 0-10V Ports. They can control variable speed pumps and can also be used to monitor simple switch closures, like push buttons or float switches.

2 - Command Bus

The HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe.

About Control XP8

The HYDROS Control XP8 is an eight 120V AC outlet energy bar and can control eight HYDROS WiFi devices with individual power monitory capabilities. Each of the individually controlled outlets is built into the HYDROS controller for the highest level of security. The two HYDROS Command Bus ports allow for a wired connection to any other HYDROS controllers to form a collective of all Controls in one. All HYDROS products Controls are engineered, assembled, and supported in the USA.

XP8 Features

  • The XP8 is a full brain that can share or take over the decision-making of a HYDROS collective. It is fully capable of taking over intelligent decisions based on the status of the collective and its inputs and outputs disconnected from the Collective.
  • Control up to 8 WiFi devices like fish feeders, dosing pumps, and even additional WiFi power strips
  • Command Bus port provides power add redundancy power to your HYDROS Collective
  • Designed to pass ETL/UL Certification
  • Universal voltage works with both 110 and 220V
  • 60W Meanwell Power Supply
  • No noisy fans, the XP8 is completely passively cooled
  • Optical isolation between the power circuitry and the control circuitry. This provides safety failure, and it isolates the control circuitry to reduce noise.

Specifications

Max Per Relay: 8A Total Max Amperage: 14A

8 - Controllable Outlets

Directly control 8 individual AC outlets with individual power monitoring capabilities to manage aquarium heaters, lighting, pumps protein skimmers, filters, and pretty much anything else.

2 - Command Bus

The HYDROS Command Bus is used to power the Control as well as communicate with other HYDROS devices for the ultimate failsafe.

HYDROS Controls are Versatile and Expandable without Extra Modules

Use any HYDROS device by itself or connect multiple devices as part of a larger automated aquarium system with NO single point of communication failure. Every HYDROS product is a smart device with its own CPU and scheduling capabilities.

What you can expect from your HYDROS Smart Devices

  • Control your HYDROS device(s) from anywhere in the world using the technologically advanced HYDROS cloud-based app
  • Ability to monitor and control your HYDROS device(s) locally through WiFi
  • A fast dual-core 32-bit processor that allows control decisions to be made within each device
  • Internal health monitoring to report voltages, currents, CPU status, and the internal temperature of each device
  • HYDROS Command Bus connections to transfer data and power to devices
 

WARRANTY

Add to cart

Hydros Control XP8

302$

HYDROS Control XP8

Directly control and power eight devices with the highest level of security. The HYDROS Control XP8 is a 120V AC energy bar with eight outlets, and like other HYDROS controllers, this device can also control up to eight HYDROS WiFi devices. Each of the individually controlled outlets is built into the HYDROS controller for the highest level of security. The XP8 is a total brain that can share or take over the decision-making of a HYDROS Collective.
Add to cart